Class 11 · Physics
Mechanical Properties of Solids NEET Questions
100 verified questionsNCERT chapter mappedFree practiceAutomatic error log
Build recall in Mechanical Properties of Solids through active solving. This bank covers the complete chapter with original NEET-style MCQs, worked explanations and chapter-level NCERT provenance—without pretending original questions are previous-year questions.
Practice Mechanical Properties of Solids free →Question preview
Three examples from the live 100-question bank. Answers appear after attempting them in practice mode.
Example 1 · difficulty 1/5
A metal wire is stretched slowly while remaining well within its elastic limit. If the applied tensile stress is doubled, then:
- A. the Young's modulus of the wire doubles
- B. the strain becomes half of its previous value
- C. the strain also doubles
- D. the stress–strain graph starts bending towards the strain axis
Example 2 · difficulty 1/5
For the same tensile stress applied within the elastic limit, the strain produced in a steel wire is observed to be far smaller than that in a rubber cord. This observation directly implies that:
- A. steel has a much larger Young's modulus than rubber
- B. rubber is more elastic than steel
- C. steel deforms more readily than rubber
- D. Young's modulus equals stress divided by the original length
Example 3 · difficulty 2/5
A steel wire of length 2.0 m and cross-sectional area 3.14×10⁻⁶ m² hangs vertically from a rigid support. When a block of mass 20 kg is attached gently to its lower end, the elongation of the wire is closest to (Y = 2.0×10¹¹ N m⁻², g = 10 m s⁻²):
- A. 0.32 mm
- B. 0.64 mm
- C. 1.28 mm
- D. 6.4 mm
The chapter mastery loop
- 1. Attempt firstExpose recall gaps before rereading.
- 2. Classify the missConcept, careless, rushed or guessed.
- 3. Re-practiceReturn until the error pattern disappears.
Frequently asked questions
How many Mechanical Properties of Solids NEET questions are available?
NeetVellum publishes 100 verified questions for this chapter. Free accounts use the daily UG quota; UG Pro removes it.
How should I revise Mechanical Properties of Solids for NEET?
Attempt questions before rereading, classify each miss, revisit the exposed NCERT concept, then re-practice until the error pattern disappears.